Vehicle loop detector
A vehicle loop detector works with a loop of wire installed in the driveway to sense a vehicle above it. The detector sends a signal to the gate controls. Depending on the loop's position and configuration, that signal can request an exit opening or help prevent the gate from closing while a vehicle occupies the detection area. Different loop functions should be identified on the entrance layout.
When planning a driveway gate, ask the automation installer to show the detection zones and explain what each does. Vehicle detection is not a substitute for the complete entrapment-protection arrangement or a separate pedestrian route. Confirm the design before driveway surfacing work so the gate equipment and ground works can be coordinated.
